Replacement Ranger Exhaust



 The original rusted and patched together exhaust is "functional", but not really a long term permanent solution. The hangers have rusted through and the muffler was just hanging its weight off the exhaust manifold and the tail pipe was rusted off the muffler body. Not good.

A heat shield on the floor above the catalytic converter rusted off and was rattling badly. I want to replace it as well. 

I'd like to find out what muffler may be even quieter than stock. Instead of trying to get the 2.5L 4 cylinder to "sound cool" I'd rather make it whisper quiet if possible. The old engine will be loud enough without a droning exhaust.

Added an aluminum heat shield above the cat and will clamp on a regular oval muffler.

Comments

Post a Comment

Popular posts from this blog

Ford Ranger - Free doesn't really mean free...

Image
 Welcome to a simple blog detailing my 2000 Ford Ranger, 5 speed, 4 cylinder build. Free to me from family,  but as we all know, nothing is ever really free. If I were to try and run it as is just because it starts up, it'd be dead in short order. I want to bring it back correctly. If I spent $4000 on a used Ranger near me I'd still be looking at replacing brakes, suspension components, doing all maintenance items and fixing random interior items as these trucks are notoriously beat on. It's so hard to find owners who keep up let alone keep track of the maintenance they do. So "free" still means hundreds of dollars in parts a lots of work still. Let's see how solid we can make it.  It does "run and drive", in fact, it made it from Las Vegas to SoCal in 2022. I'll detail what it takes to make this truck not just move but, hopefully, make it a solid, reliable, comfortable truck that I feel confident giving to my 16 yr old daughter to get her throug...
Read more

Old Ranger Gets Floor Pan Patched and New Carpet

Image
Ranger with Explorer bucket seats, center console, new carpet   Hiding a nasty surprise 26 years of service, and dirt As I try to make this old '00 Ford Ranger as clean and comfortable as I can on a budget I have run into additional unexpected issues. This is "Scope Creep" as they call it. In this case, a rotted away driver side floor pan!  I decided to spring for brand new ACC "cut pile" carpet with the "mass backing". To the tune of around $200 this will be one of the larger single items I've purchased for this tired old truck. I'd considered pulling a complete carpet from the junkyard for $35, but it'd still be hard to clean out 20 years of dirt and wear. Since this is for my daughter's first vehicle this is a "splurge" that will make the interior clean, fresh and new feeling with the nice condition '98 Explorer Sport seats and '00 Explorer center console I'm installing.  Almost fine, but we can do better Out wi...
Read more

Explorer seats in the Ranger

Image
1 '98 Explorer seats on '00 Ranger rails   Typical Ranger interior wear The driver seat was in typical Ranger condition, shredded, dirty and uncomfortable. The back foam was beat down and the cloth was failed. The 60/40 seat setup was not ideal and I want to bring the interior back to comfortable and clean. I also wanted to do it for the least amount of money. I considered cheap covers and hacking the stock driver seat into a single bucket, or using a passenger seat to re-skin a converted driver but that would still be nearly the cost of whole seats. I looked at a bunch of other options for seats while in the junkyard that I could custom fit (Mazda 3 sport, Subaru WRX, Ford Focus) but when I came across these seats in a '98 Ford Explorer Sport 2 door I decided to try this route. These will look factory and clean and the foam is firm and dare I say basically new looking in most regards, especially from a '98. Looks like I'll still be doing some custom work to the Ran...
Read more